Pelatihan Pemanfaatan Simulator Sistem Injeksi Sepeda Motor untuk Meningkatkan Kompetensi Motor Bakar Siswa SMK Bina Nusa Slawi
Abstract
SMK is a school that produces graduates who are competent and ready to work. However, the Covid-19 outbreak forced students to study at home so the competency of SMK graduates was less than optimal. Student competency improvement training is the solution to this problem. Training activities on the use of injection simulators at Bina Nusa Slawi Vocational School are one of the activities to increase student competency. This training was attended by 20 class XII students majoring in TBSM. This training was carried out through several stages, namely the preparation, implementation, and evaluation stages. The implementation stage starts with the pre-test session, material presentation, demonstration, and practicum. The final stage is training evaluation. The results of the evaluation of learning outcomes show that students' understanding of internal combustion engines and injection systems has increased compared to before attending the training. Evaluation of satisfaction shows that students are satisfied with the instructor's delivery method, the usefulness of the training, and the development and improvement of training in the future. This is proven by the average student assessment on the questionnaire, which is above 3.
Downloads
References
Aminur, A. (2021). Bimbingan Teknis Pembuatan Kampas Rem Cakram Berbahan Komposit Polimer Untuk Sepeda Motor. Dinamisia : Jurnal Pengabdian Kepada Masyarakat, 5(4), 1002–1008. https://doi.org/10.31849/dinamisia.v5i4.5892
Amir, F., Prayama, D., Fadilillah, F., & Riyanto, R. (2022). Sains Pelatihan Pembuatan Video Pembelajaran Berbasis IT Guru SMP PGRI Kabupaten Pelalawan. Dinamisia : Jurnal Pengabdian Kepada Masyarakat, 6(5), 1225–1231. https://doi.org/10.31849/dinamisia.v6i5.11139
Budi, S. S., Syarifudin, S., & ... (2022). Pemanfaatan Motor Bakar Melalui Pelatihan Perawatan Sistem Bahan Bakar Bagi Peserta Didik Kelas XII SMK Bina Nusa Slawi Kabupaten Tegal. Jurnal Abdimas PHB …, 5(1), 171–176. http://ejournal.poltektegal.ac.id/index.php/abdimas/article/view/2735
Dyah Apriliani, Ginanjar Wiro Sasmito, & Hepatika Zidny Ilmadina. (2022). Pemanfaatan Teknologi Informasi untuk Optimalisasi Dakwah Bagi Kader Nasyiatul Aisyiyah Bulakamba-Brebes. Dinamisia : Jurnal Pengabdian Kepada Masyarakat, 6(5), 1255–1261. https://doi.org/10.31849/dinamisia.v6i5.7972
Fatkhurrozak, F., Sanjaya, F. L., Syarifudin, S., & Syaiful, S. (2020). Pengaruh Diethyl Ether Terhadap Torsi dan Daya Mesin Diesel Injeksi Langsung Berbahan Bakar Solar Campuran Jatropa. Infotekmesin, 11(2), 137–140. https://doi.org/10.35970/infotekmesin.v11i2.258
Girik Allo, M. D. (2022). Pelatihan Penggunaan Reference Manager Mendeley bagi Mahasiswa Program Studi Pendidikan Bahasa Inggris UKI Toraja. Dinamisia : Jurnal Pengabdian Kepada Masyarakat, 6(4), 1033–1042. https://doi.org/10.31849/dinamisia.v6i4.10432
Mara, I. M., Sayoga, I. M. A., Yudhyadi, I. G. N. K., & Nuarsa, I. M. (2018). Analisis emisi gas buang dan daya sepeda motor pada volume silinder diperkecil. Dinamika Teknik Mesin, 8(1), 8. https://doi.org/10.29303/dtm.v8i1.154
Nurcahyo, H. (2020). Pemberdayaan Potensi Guru SMK Kota Tegal dalam Pembuatan Hand Sanitizer untuk Pandemi Covid-19. Dinamisia : Jurnal Pengabdian Kepada Masyarakat, 5(2), 443–449. https://doi.org/10.31849/dinamisia.v5i2.4267
Sanjaya, F. L. (2020). Pengaruh Penambahan Butanol sebagai Campuran Bahan Bakar Premium terhadap Torsi dan Daya Mesin Bensin dengan Sistem EGR. 1(1), 7–10. https://doi.org/10.35970/accurate.v1i1.175
Sanjaya, F. L., Fatkrurrozak, F., Syarifudin, S., & Wakhyudi, D. (2022). Pelatihan Perancangan Mesin Pada SMK Diponegoro Lebaksiu Kabupaten Tegal Jurusan TKRO Dengan Menggunakan Aplikasi Autodesk Inventor. Dinamisia : Jurnal Pengabdian Kepada Masyarakat, 6(2), 484–490. https://doi.org/10.31849/dinamisia.v6i2.9279
Sharudin, H., Abdullah, N. R., Najafi, G., Mamat, R., & Masjuki, H. H. (2017). Investigation of the effects of iso-butanol additives on spark ignition engine fuelled with methanol-gasoline blends. Applied Thermal Engineering, 114, 593–600. https://doi.org/10.1016/j.applthermaleng.2016.12.017
Syarifudin, S., Suprihadi, A., & ... (2021). Workshop Peningkatan Kompetensi Motor Bakar Bagi Peserta Didik Kelas XII Jurusan Teknik Bisnis Sepeda Motor SMK Muhammadiyah Kramat Kabupaten Tegal. Jurnal Abdimas …, 4(1), 103–108. http://ejournal.poltektegal.ac.id/index.php/abdimas/article/view/2246%0Ahttp://ejournal.poltektegal.ac.id/index.php/abdimas/article/download/2246/1323
Syarifudin, S., & Syaiful, S. (2019). Pengaruh Penggunaan Energi Terbarukan Butanol Terhadap Penurunan Emisi Jelaga Mesin Diesel Injeksi Langsung Berbahan Bakar Biodiesel Campuran Solar Dan Jatropa. Infotekmesin, 10(1), 18–22. https://doi.org/10.35970/infotekmesin.v10i1.20
Verma, S., Das, L. M., Kaushik, S. C., & Bhatti, S. S. (2019). The effects of compression ratio and EGR on the performance and emission characteristics of diesel-biogas dual fuel engine. In Applied Thermal Engineering (Vol. 150). Elsevier Ltd. https://doi.org/10.1016/j.applthermaleng.2019.01.080